Before I purchased this I was using one of the old frames where you needed a box spring, there was a major dent in my new mattress, was almost ready to get another mattress till I just got a headboard that my old frame rales would not connect to so had to get a new frame, I decided on these since thought would support the mattress better. Let me tell you, this thing saved me mega bux, there is no longer a dent in my mattress it is perfect and we slept so much better, thank you so much.
Because it is built of reinforced steel, this bed frame is excellent and long-lasting. Everything is well-assembled, with no wobbling or noise. Assembly was quick and straightforward, and everything you needed, including tools and instructions, was included. This frame also contains under-bed storage.
It might not be too bad to assemble if you have help. I did not.
It actually has decent instructions I guess. It had all the parts too, and a couple spare bolts.
But I think I took over TWO HOURS to put this together. This is not the first thing I’ve ever put together with tons of parts.
I had the headboard together when I realized that one of the little square cuffs had come out of the arm. Does it just go back in?? NO. I had to unscrew one side to take the rod out, push the cuff in, and repeat assembly.
Then I get to building the bottom leg and realize the hole on the headboard rod is facing the wrong way. Then I have to unscrew the whole of the offending rod on the head board - which is already annoying to put together to begin with - and I’ve already done it twice. This can be considered my fault as the direction of the hole IS indicated on the directions. I am however blind as a bat, and understanding exactly which way the hole should be wasn’t super clear to me. A nice black arrow or a zoom in on instructions or even a STICKER on the bar would have made this go by SO MUCH LESS frustratingly.
As I am putting this together I notice in places that there’s little chips out of the black paint. Not just like simple scratch/cuffs, but the silver metal is exposed. I also notice the welding is sometimes kinda sloppy looking. I hope this bed frame lasts a while after all it took to put it together.
So, I put the foot of the bed together the same way as the headboard. It also has a bar with a hole. I faced the hole the same way as the headboard. THAT IS WRONG! Not only was that wrong, one side of this thing had square plastic cuffs that must have been a millimeter too small in diameter. I struggled and struggled to get the rods in. I even wacked at it with the rubber mallet (Included thankfully!) Eventually I got it together. And then when I got to step where I attach it to the midsection I realize that the hole bar does not face the same direction as the headboard. Again, it’s in the instructions - it’s just big enough for ants.
Now there are some pegs you wack with the mallet to get them into place (indicated in instructions where.) However, I’m not that strong, nor do I hit very hard, and I noticed in some places the metal warped. Not dramatically, and of course the mattress is on top so no one would see it.
The metal slats were the easiest. They just slide right in.
Some parts do not have stickers. Generally though, one of a pair of duplicates has a sticker and the other is bundled with it.
Have yet sleep on bed (waiting for mattress delivery) but bed seems sturdy and Im hoping it holds up. Came very well packed. Was impressed with how well all parts are labeled. Directions were very clear and had no problem putting bed together with no help (most difficult was the last step putting the support slats in, but was fine once you get the hang of it). When completed bed is very stable and solid. I am very impressed with this product from packaging, shipping, stability and looks. Really surprised at quality for the price. Only reason I didnt give 5 stars is the fact I havent had the chance use it for real. Will follow up later and report if my initial review supports my initial findings. Initial impression: greater value than I expected.
Reviews
Perfect
Before I purchased this I was using one of the old frames where you needed a box spring, there was a major dent in my new mattress, was almost ready to get another mattress till I just got a headboard that my old frame rales would not connect to so had to get a new frame, I decided on these since thought would support the mattress better. Let me tell you, this thing saved me mega bux, there is no longer a dent in my mattress it is perfect and we slept so much better, thank you so much.
Super durable.
Because it is built of reinforced steel, this bed frame is excellent and long-lasting. Everything is well-assembled, with no wobbling or noise. Assembly was quick and straightforward, and everything you needed, including tools and instructions, was included. This frame also contains under-bed storage.
Ugh sort of a nightmare to put together
It might not be too bad to assemble if you have help. I did not. It actually has decent instructions I guess. It had all the parts too, and a couple spare bolts. But I think I took over TWO HOURS to put this together. This is not the first thing I’ve ever put together with tons of parts. I had the headboard together when I realized that one of the little square cuffs had come out of the arm. Does it just go back in?? NO. I had to unscrew one side to take the rod out, push the cuff in, and repeat assembly. Then I get to building the bottom leg and realize the hole on the headboard rod is facing the wrong way. Then I have to unscrew the whole of the offending rod on the head board - which is already annoying to put together to begin with - and I’ve already done it twice. This can be considered my fault as the direction of the hole IS indicated on the directions. I am however blind as a bat, and understanding exactly which way the hole should be wasn’t super clear to me. A nice black arrow or a zoom in on instructions or even a STICKER on the bar would have made this go by SO MUCH LESS frustratingly. As I am putting this together I notice in places that there’s little chips out of the black paint. Not just like simple scratch/cuffs, but the silver metal is exposed. I also notice the welding is sometimes kinda sloppy looking. I hope this bed frame lasts a while after all it took to put it together. So, I put the foot of the bed together the same way as the headboard. It also has a bar with a hole. I faced the hole the same way as the headboard. THAT IS WRONG! Not only was that wrong, one side of this thing had square plastic cuffs that must have been a millimeter too small in diameter. I struggled and struggled to get the rods in. I even wacked at it with the rubber mallet (Included thankfully!) Eventually I got it together. And then when I got to step where I attach it to the midsection I realize that the hole bar does not face the same direction as the headboard. Again, it’s in the instructions - it’s just big enough for ants. Now there are some pegs you wack with the mallet to get them into place (indicated in instructions where.) However, I’m not that strong, nor do I hit very hard, and I noticed in some places the metal warped. Not dramatically, and of course the mattress is on top so no one would see it. The metal slats were the easiest. They just slide right in. Some parts do not have stickers. Generally though, one of a pair of duplicates has a sticker and the other is bundled with it.
Good value for the money
Have yet sleep on bed (waiting for mattress delivery) but bed seems sturdy and Im hoping it holds up. Came very well packed. Was impressed with how well all parts are labeled. Directions were very clear and had no problem putting bed together with no help (most difficult was the last step putting the support slats in, but was fine once you get the hang of it). When completed bed is very stable and solid. I am very impressed with this product from packaging, shipping, stability and looks. Really surprised at quality for the price. Only reason I didnt give 5 stars is the fact I havent had the chance use it for real. Will follow up later and report if my initial review supports my initial findings. Initial impression: greater value than I expected.
Rails were too small
Cute bed, but the measurements were way off! Some of the rails were too long and some were short.
UP-grade
The perfect bed frame for stability and storage. I wanted more space under my bed for storage and this is it. Assembly was also easy.
Looks great
Bed came really quick. We had a problem setting it up at first but it was a quick fix. Looks fantastic.
Works fine
This is a good bed frame for the price.
Comfort!
Great bed frame well made. The bed frame is very comfortable and Im very happy with this product.
Good Quality Bed Frame
Assemble of the bed took me 30 minutes or less. Love it!
Add a review