Seems to be well made and has a nice finish. Took some time to assemble but dont be intimidated. Get a nice area to put all the pieces out in order, look over the directions and you should have no problems, It will be worth the time you invest because it it a nice versatile unit. I also used wood glue on the complete assembly to make it that much stronger, I like overkill,why not make it stronger with a simple strip of glue in between all the pieces.
I really enjoy this space saver it fits my 3D printer, my regular printer plus the paper and any extra things I need to store such as ink or notebooks!
It was fairly straightforward to put together, my son did it for me. The drawer tracks pre drilled holes were exactly 1/2 inch too low and we had to redrill to make the drawers fit. I dislike the fake wood grain as it looks exactly like formica. I plan to cover it with an adhesive veneer. Otherwise, the table works as described and its unique function is exactly what we need.
TL;DR:
As long as you go into building this with a few tricks, this table seems to offer a great value (at ~$100) for a somewhat unique design.
Full review:
While my gf was looking for a table that she could use for her nail stamping hobby, we happened upon a few tables like this one. But many other tables only came in black and were more expensive. While I dont tend to buy items with none/very few reviews, we took a chance on this one as it was the only one that came in white while also being a reasonable price.
A couple tricks while building it:
1. As one reviewer mentioned, the holes that are drilled for the wheels dont match the wheels it comes with. I opted to start placing the wheels by drilling them into the holes that are nearest the corners of the board, but then drilling the rest toward the center of the board. This should prevent it from tipping, while keeping the wheels far enough from the edge to prevent splintering of the board. Also, you could always replace the wheels with better ones down the line.
2. After putting in the drawers, they may go in crooked. This can be adjusted even after drilling in the brackets. If you find that one side is too high (or low) you can unscrew the front-most screw, slide the bracket up (or down) and screw it in through one of the other bracket holes. This gives you a second, or even third, shot at getting them in right.
While I think that products should be sold and prepared better than this item, it can easily be adjusted if you take it slow and steady, and that seems like a fair trade-off for this fairly unique item with a good cost-to-utility ratio.
If anything significant happens over long-term use, Ill update the review as needed.
If you are not comfortable winging the assembly dont buy this! Parts were mislabeled, holes for casters drilled wrong, assembly instructions not clear. Ive been assembling furniture for years and never had issues like this. Look at the pictures to identify the parts, the parts I had were labeled wrong.
Reviews
Nice unit.
Seems to be well made and has a nice finish. Took some time to assemble but dont be intimidated. Get a nice area to put all the pieces out in order, look over the directions and you should have no problems, It will be worth the time you invest because it it a nice versatile unit. I also used wood glue on the complete assembly to make it that much stronger, I like overkill,why not make it stronger with a simple strip of glue in between all the pieces.
Perfect
Thank you
Received Quick and fits the bill
Fast shipping and fits the bill for what we were looking for.
Follow directions
It was time consuming but my daughter loves it as far as I know.
small space saver
I really enjoy this space saver it fits my 3D printer, my regular printer plus the paper and any extra things I need to store such as ink or notebooks!
Good table, unattractive veneer.
It was fairly straightforward to put together, my son did it for me. The drawer tracks pre drilled holes were exactly 1/2 inch too low and we had to redrill to make the drawers fit. I dislike the fake wood grain as it looks exactly like formica. I plan to cover it with an adhesive veneer. Otherwise, the table works as described and its unique function is exactly what we need.
Really good if youre a little handy.
TL;DR: As long as you go into building this with a few tricks, this table seems to offer a great value (at ~$100) for a somewhat unique design. Full review: While my gf was looking for a table that she could use for her nail stamping hobby, we happened upon a few tables like this one. But many other tables only came in black and were more expensive. While I dont tend to buy items with none/very few reviews, we took a chance on this one as it was the only one that came in white while also being a reasonable price. A couple tricks while building it: 1. As one reviewer mentioned, the holes that are drilled for the wheels dont match the wheels it comes with. I opted to start placing the wheels by drilling them into the holes that are nearest the corners of the board, but then drilling the rest toward the center of the board. This should prevent it from tipping, while keeping the wheels far enough from the edge to prevent splintering of the board. Also, you could always replace the wheels with better ones down the line. 2. After putting in the drawers, they may go in crooked. This can be adjusted even after drilling in the brackets. If you find that one side is too high (or low) you can unscrew the front-most screw, slide the bracket up (or down) and screw it in through one of the other bracket holes. This gives you a second, or even third, shot at getting them in right. While I think that products should be sold and prepared better than this item, it can easily be adjusted if you take it slow and steady, and that seems like a fair trade-off for this fairly unique item with a good cost-to-utility ratio. If anything significant happens over long-term use, Ill update the review as needed.
Perfect
Exactly as advertised. Bought for elearning and fits the bill perfectly in small room.
Good
Affordable price
Buyer Beware!
If you are not comfortable winging the assembly dont buy this! Parts were mislabeled, holes for casters drilled wrong, assembly instructions not clear. Ive been assembling furniture for years and never had issues like this. Look at the pictures to identify the parts, the parts I had were labeled wrong.
Add a review