It is strong with a good not too light not too heavy wood. However, some screws need to move 1/4 of a circle in many times until they get done, due to the limited space around them.
This is a good, solid piece. You do have to study the directions, being only line / drawings, to make sure everything is lined up and youre using the hex screws and wooden dowels in the places they need to go. And to make sure nothing is being put on upside down, which I had to bring the directions to look at, and compare, the bar that goes on the top, that screws on where the magnets are that hold the doors securely.
The magnets are a little strong,Im thinking of putting a piece of scotch tape over them so the doors open with less of a pull.
Youre putting it together upside down until both sides are secured to the top. They did leave out one screw placement in the directions, the top, back hex screw. It shows the dowel placement, but not the screw.
All of the parts and screws were there,the screw itself wasnt missing, it was only left out in the assembly diagram.
Another thing you need to be sure of is the top and bottom (back) grooved pieces that you slide the back into. It does show, in the parts diagram, one is wider and shorter than the other. And when placing them, so they arent turned the wrong way, the solid wood side of the groove which is a little wider, goes toward the inside of the cabinet. Its easy to overlook, but in the assembly diagram,when I saw the back just slides into the groove of each bar, I knew they had to match up. And once I put it together I didnt want to have to take it apart. So I took a few good,close looks at the diagrams before I put any hex screws in.
I can also see why two people are recommended for assembly. It would be easier if someone was applying pressure , holding the pieces together, when youre putting in the hex screws but I did it without another person. You do really have to crank down on them to make sure the hex screws are very securely screwed in.
The directions are accurate, except that the top, back hex screw placement is left out, but its all about studying the line drawing of the parts making sure each piece is the piece that needs to go where it does. Also doing it in the order the assembly steps show to put it together in.
The red V is where the hex screw placement is left out of the diagram(s). I numbered each V in the diagrams because I knew how many hex screws there were and that a recessed hole where the hex screws go in was there, where the placement of the screw should be shown.
This is fairly simple to put together if you pre/drill the holes with the screw or use a power drill. One of the pieces received is too short so there is a gap in the back of the cabinet.
update
I started taking it apart because I thought maybe I used the drawer panel, but nope that wasnt the problem. I decided to keep it because the gap was toward the back and couldnt be seen. I started putting it back together but this time I assembled it upside down vs on its side (per the included instructions) and to my surprise the gap was gone!
My suggestion to putting this together:
1/ Assemble upside down
2/ Use a drill to assemble or pre/screw each piece with the screw before assembling. The pre/drilled holes are not as big as the screw and can be difficult to get started without a screwdriver.
I dont have a photo unfortunately but the product didnt have any damages. It took 2 people to assemble over 2 hours. It has a cherry Mahogany color especially in bright light. Indoors it looks more espresso in soft light. Recommend using your own tools! Dont mess with the tool provided. Dont tighten screws all the way until its assembled, then go back and tighten when finished. Other reviews are mostly accurate,
I bought this kitchen cart to have some storage space on my lanai.
This cart came packed very well, but one of the doors still had some slight damage. I didnt contact the manufacturer, because the process of getting a replacement part from them is too cumbersome.
I am bummed that the little crack is on one of the doors, but since it doesnt interfere with the functionality of the cart, I let it be.
The cart needs to be self/assembled, and if you have never assembled a small piece of furniture before, I would recommend you get some help.
The cart comes with step by step assembly instruction that are mainly image sketches and not many words. Each part plus the hardware have a letter assigned for identification, on the sketches. Unfortunately the parts themselves dont have any letter stickers on them, so you might have to get back to the instruction manuals content page and compare the parts to the sketches, to make sure you have the correct one.
I have done small furniture assembly before, so it took me about 45/60 minutes to put it together completely.
Considering the price for this item is on the lower end, it is of very good quality, and doesnt look cheap at all. The doors come with (unadjustable) hinges and magnetic closures.
There is a tip in the instruction manual what to do, should the doors not sit/close evenly.
However, I had no problems whatsoever with that. I assembled the doors according to the instructions and they sat evenly in the frame and closed and opened without problems.
There is a pack of decorative covers in the hardware package, so you can cover visible screw holes. The pewter colored door/and drawer knobs make the car look really elegant.
Two of the 4 wheels have brakes, and the cart stands sturdy, when those are closed.
There are only two different kinds of screws in the package, and one allan wrench. You just need to use your own phillips screw driver for a few of the screws, and you are ready to assemble .
I really like the way the back wall and drawer bottom are assembled. They are put in the notches of their respective frame, and held in very sturdy (without moving around) by just screwing the frames together correctly. No messing around with having to hammer in a bunch of small nails in the back.
I would have given this item 5 stars, if the pieces had been marked according to the instruction manual. That would have made the assembly easier and quicker.
Another little hoopla for me was the fact that you cant just call the manufacturer to get a defect part replaced. You need to send them some paperwork with proof of purchase first, as I said earlier, it is somewhat cumbersome.
Other than that I am really satisfied with what I got, and I believe I will be able to put this cart to good use for many years.
Reviews
It is original, made of good and strong wood. However, you need to be patient putting it together.
It is strong with a good not too light not too heavy wood. However, some screws need to move 1/4 of a circle in many times until they get done, due to the limited space around them.
Assembly
This is a good, solid piece. You do have to study the directions, being only line / drawings, to make sure everything is lined up and youre using the hex screws and wooden dowels in the places they need to go. And to make sure nothing is being put on upside down, which I had to bring the directions to look at, and compare, the bar that goes on the top, that screws on where the magnets are that hold the doors securely. The magnets are a little strong,Im thinking of putting a piece of scotch tape over them so the doors open with less of a pull. Youre putting it together upside down until both sides are secured to the top. They did leave out one screw placement in the directions, the top, back hex screw. It shows the dowel placement, but not the screw. All of the parts and screws were there,the screw itself wasnt missing, it was only left out in the assembly diagram. Another thing you need to be sure of is the top and bottom (back) grooved pieces that you slide the back into. It does show, in the parts diagram, one is wider and shorter than the other. And when placing them, so they arent turned the wrong way, the solid wood side of the groove which is a little wider, goes toward the inside of the cabinet. Its easy to overlook, but in the assembly diagram,when I saw the back just slides into the groove of each bar, I knew they had to match up. And once I put it together I didnt want to have to take it apart. So I took a few good,close looks at the diagrams before I put any hex screws in. I can also see why two people are recommended for assembly. It would be easier if someone was applying pressure , holding the pieces together, when youre putting in the hex screws but I did it without another person. You do really have to crank down on them to make sure the hex screws are very securely screwed in. The directions are accurate, except that the top, back hex screw placement is left out, but its all about studying the line drawing of the parts making sure each piece is the piece that needs to go where it does. Also doing it in the order the assembly steps show to put it together in. The red V is where the hex screw placement is left out of the diagram(s). I numbered each V in the diagrams because I knew how many hex screws there were and that a recessed hole where the hex screws go in was there, where the placement of the screw should be shown.
Great buy
Lining up the backboard was a little off, but a great buy
Nice but flaws
This is fairly simple to put together if you pre/drill the holes with the screw or use a power drill. One of the pieces received is too short so there is a gap in the back of the cabinet. update I started taking it apart because I thought maybe I used the drawer panel, but nope that wasnt the problem. I decided to keep it because the gap was toward the back and couldnt be seen. I started putting it back together but this time I assembled it upside down vs on its side (per the included instructions) and to my surprise the gap was gone! My suggestion to putting this together: 1/ Assemble upside down 2/ Use a drill to assemble or pre/screw each piece with the screw before assembling. The pre/drilled holes are not as big as the screw and can be difficult to get started without a screwdriver.
Cute cart, mohagany more than espresso
I dont have a photo unfortunately but the product didnt have any damages. It took 2 people to assemble over 2 hours. It has a cherry Mahogany color especially in bright light. Indoors it looks more espresso in soft light. Recommend using your own tools! Dont mess with the tool provided. Dont tighten screws all the way until its assembled, then go back and tighten when finished. Other reviews are mostly accurate,
Nice Kitchen Cart /
I bought this kitchen cart to have some storage space on my lanai. This cart came packed very well, but one of the doors still had some slight damage. I didnt contact the manufacturer, because the process of getting a replacement part from them is too cumbersome. I am bummed that the little crack is on one of the doors, but since it doesnt interfere with the functionality of the cart, I let it be. The cart needs to be self/assembled, and if you have never assembled a small piece of furniture before, I would recommend you get some help. The cart comes with step by step assembly instruction that are mainly image sketches and not many words. Each part plus the hardware have a letter assigned for identification, on the sketches. Unfortunately the parts themselves dont have any letter stickers on them, so you might have to get back to the instruction manuals content page and compare the parts to the sketches, to make sure you have the correct one. I have done small furniture assembly before, so it took me about 45/60 minutes to put it together completely. Considering the price for this item is on the lower end, it is of very good quality, and doesnt look cheap at all. The doors come with (unadjustable) hinges and magnetic closures. There is a tip in the instruction manual what to do, should the doors not sit/close evenly. However, I had no problems whatsoever with that. I assembled the doors according to the instructions and they sat evenly in the frame and closed and opened without problems. There is a pack of decorative covers in the hardware package, so you can cover visible screw holes. The pewter colored door/and drawer knobs make the car look really elegant. Two of the 4 wheels have brakes, and the cart stands sturdy, when those are closed. There are only two different kinds of screws in the package, and one allan wrench. You just need to use your own phillips screw driver for a few of the screws, and you are ready to assemble . I really like the way the back wall and drawer bottom are assembled. They are put in the notches of their respective frame, and held in very sturdy (without moving around) by just screwing the frames together correctly. No messing around with having to hammer in a bunch of small nails in the back. I would have given this item 5 stars, if the pieces had been marked according to the instruction manual. That would have made the assembly easier and quicker. Another little hoopla for me was the fact that you cant just call the manufacturer to get a defect part replaced. You need to send them some paperwork with proof of purchase first, as I said earlier, it is somewhat cumbersome. Other than that I am really satisfied with what I got, and I believe I will be able to put this cart to good use for many years.
Wouldve been 5 stars if better instructions
I love the product. Just wish the instructions were easier to read follow.
Nice microwave cart with storage
The only thing missing would be a slide out table in front to put food on it but it is a very nice cart
Very pleased
Sturdy, good value. Using it to store overflow of heavy serving dishes.
Great buy
So beautiful, exactly what I needed
Add a review