I would like to first say that this is a great deal for a decent looking bed frame.
The instructions were easy to follow and although it takes a long time to assemble, taking extra steps to ensure it remains solid and squeak free makes it an ideal frame with a great cost.
First, get a small tube of Loctite, industrial red. You dont need to cover the whole bolt, just the places where the nuts and placements are rested on. This will do two things: It will help prevent the bolts from loosening over time, causing the bed to wobble, and it will help remove any possible noises from the joints.
Second, get yourself a double torque screwdriver with a machine grade bit set. Using a double torque screwdriver will make screwing in the bolts a lot easier and will allow you to get the connections tight as possible. You dont want any wiggle room, just make sure to fully tighten all bolts after each page of the manual.
Third, you can use the frame 15 minutes after you put it together, but be gentle getting into and out until a day has passed, this allows the loctite to fully cure and cement the bolts into place. After that the frame will be secure solid.
Finally, get the 5 year warranty. With frames, there is no way of knowing when a defect will show. It can be perfect for the first year and then a leg or support can break right after, it is worth having.
Update (Sept. 21): A very important addition. Go down to your local hardware store and have them cut 2 sheets of 1/2 plywood for each half the length of the bed size (example: 40 x 60 for queen).
I started to have very bad back and joint pain as the mattress was sagging between the rods, placing plywood on top solved this issue (using plywood is much more supporting and cheaper than buying prebuilt bunkerboards). I would buy again!
WE purchased this bed for my daughter. It was very reasonably priced and very sturdy once assembled. Assembly was difficult and took a long time. The cheap allen wrench that came with the assembly only jasted about 5 bolts before it rounded. Other than that we are very happy with the product. Nice size.
The fasteners first the screws arent mounted very well, I managed to break one when I was putting it together, but still made it work. The corners are sharp, Im constantly hitting my legs on them. And most importantly its uncomfortable, I didnt need a box spring for my mattress with my old frame but I sure do now. My mattress sinks way too far in with this frame, I think the supports are too narrow.
It started with a delayed delivery. Then when the box was delivered, there was no notification of it being done. The box had more tape on it than the tape isle at Staples. So, needless to say, I was a little nervous opening up the box. Everything appeared to be present, so I began the assembly process. The directions could have been a tad bit bigger, a little difficult to read. I was disappointed with the contact paper wood I had to re glue a couple corners that had begun to peel. The photo shows the bent piece that I had to straighten and the side rail that had a nice little bow to it. Would I buy another, no. Did I get what I paid for, maybe. I was hoping for just a little bit more. Three Stars.
Some of parts are uneven made it a little harder to complete the task and you needed tools that werent provided but otherwise easy and a very sturdy and cute bed frame I love it just wish putting it together had been as easy as it said it would be Easy to fix.
Reviews
Needs better instructions
Worst part was putting it together. Took two hours not 15 min. Advise getting help! It is ok.
Solid Frame at Great Value, But Take some Extra Steps to Make it Last (Updated)
I would like to first say that this is a great deal for a decent looking bed frame. The instructions were easy to follow and although it takes a long time to assemble, taking extra steps to ensure it remains solid and squeak free makes it an ideal frame with a great cost. First, get a small tube of Loctite, industrial red. You dont need to cover the whole bolt, just the places where the nuts and placements are rested on. This will do two things: It will help prevent the bolts from loosening over time, causing the bed to wobble, and it will help remove any possible noises from the joints. Second, get yourself a double torque screwdriver with a machine grade bit set. Using a double torque screwdriver will make screwing in the bolts a lot easier and will allow you to get the connections tight as possible. You dont want any wiggle room, just make sure to fully tighten all bolts after each page of the manual. Third, you can use the frame 15 minutes after you put it together, but be gentle getting into and out until a day has passed, this allows the loctite to fully cure and cement the bolts into place. After that the frame will be secure solid. Finally, get the 5 year warranty. With frames, there is no way of knowing when a defect will show. It can be perfect for the first year and then a leg or support can break right after, it is worth having. Update (Sept. 21): A very important addition. Go down to your local hardware store and have them cut 2 sheets of 1/2 plywood for each half the length of the bed size (example: 40 x 60 for queen). I started to have very bad back and joint pain as the mattress was sagging between the rods, placing plywood on top solved this issue (using plywood is much more supporting and cheaper than buying prebuilt bunkerboards). I would buy again!
Nice Bed
WE purchased this bed for my daughter. It was very reasonably priced and very sturdy once assembled. Assembly was difficult and took a long time. The cheap allen wrench that came with the assembly only jasted about 5 bolts before it rounded. Other than that we are very happy with the product. Nice size.
Its uncomfortable, do not recommend.
The fasteners first the screws arent mounted very well, I managed to break one when I was putting it together, but still made it work. The corners are sharp, Im constantly hitting my legs on them. And most importantly its uncomfortable, I didnt need a box spring for my mattress with my old frame but I sure do now. My mattress sinks way too far in with this frame, I think the supports are too narrow.
Once upon a mattress
It started with a delayed delivery. Then when the box was delivered, there was no notification of it being done. The box had more tape on it than the tape isle at Staples. So, needless to say, I was a little nervous opening up the box. Everything appeared to be present, so I began the assembly process. The directions could have been a tad bit bigger, a little difficult to read. I was disappointed with the contact paper wood I had to re glue a couple corners that had begun to peel. The photo shows the bent piece that I had to straighten and the side rail that had a nice little bow to it. Would I buy another, no. Did I get what I paid for, maybe. I was hoping for just a little bit more. Three Stars.
Great price well built
2 thumbs up Overpriced a bit.
Beautiful
Not as easy to put together as described but not a problem. It turned out perfect. Very sturdy. Go for it!
Worth the Price
Good value for the money, a sturdy bedInstructions not so great! Arrived in a timely fashion Enough strength.
Great head frame assembly a little more difficult than led to believe but over all great
Some of parts are uneven made it a little harder to complete the task and you needed tools that werent provided but otherwise easy and a very sturdy and cute bed frame I love it just wish putting it together had been as easy as it said it would be Easy to fix.
It is very nice looking
I use it for bedtime. Very good.
Add a review