great except minor assembly wrinkle easy to fix (wobble)
Overall very nice. Love them. Look very nice. Good packaging and I liked that the bolts had the proper washers already on and each group rubber banded together.
On the seats, Inspect where the legs will set. There may be a staple(s) under the cover in the area where the leg will sit possibly making the level off (wobble). The seat should end up level with the chair back brace it bolts to. If not, that can also cause wobble. Check leg lengths, if one is very slightly longer maybe use that one opposite the staple(s) side. I recommend putting the seat upside down on your lap for assembly. If you dont have a metric hex ratchet, a 3/16th will work as the provided hex key is a bit tedious - but dont over tighten. Assemble everything so the screws are just tight but the washers can still spin. Stand the chair on its legs and sit on it with a wiggle for a second to settle things evenly. Stand up check for wobble. If none, flip it back onto your lap and tighten things up gradually crisscrossing pattern. If one of the front legs are a little shorter causing wobble, remove it and put a cut piece of cardboard between the leg seat reassemble should take care of it.
great except minor assembly wrinkle easy to fix (wobble)
Overall very nice. Love them. Look very nice. Good packaging and I liked that the bolts had the proper washers already on and each group rubber banded together. On the seats, Inspect where the legs will set. There may be a staple(s) under the cover in the area where the leg will sit possibly making the level off (wobble). The seat should end up level with the chair back brace it bolts to. If not, that can also cause wobble. Check leg lengths, if one is very slightly longer maybe use that one opposite the staple(s) side. I recommend putting the seat upside down on your lap for assembly. If you dont have a metric hex ratchet, a 3/16th will work as the provided hex key is a bit tedious - but dont over tighten. Assemble everything so the screws are just tight but the washers can still spin. Stand the chair on its legs and sit on it with a wiggle for a second to settle things evenly. Stand up check for wobble. If none, flip it back onto your lap and tighten things up gradually crisscrossing pattern. If one of the front legs are a little shorter causing wobble, remove it and put a cut piece of cardboard between the leg seat reassemble should take care of it.