It took me several hours alone to finally complete stand assembly. I had to undo two areas shown on the pics because they were assembled backwards. Ensure I when faxing upward shows unfinished side, also on F, ensure the three holes circled are positioned accordingly, the two holes closer together in the bottom. I did have one area where when inserting the Cam lock, it destroyed the board a little, but I was able to recover. Its also important to ensure the arrow on the Cam lock is pointed correctly to ensure its open to receive Cam bolt. This comes in handy when especially adding E. If arrows are in open position, the Cam bolts will slip in the Cam locks like butter. Once assembled, it appears to be a pretty sturdy piece of furniture.
Pretty good product
It took me several hours alone to finally complete stand assembly. I had to undo two areas shown on the pics because they were assembled backwards. Ensure I when faxing upward shows unfinished side, also on F, ensure the three holes circled are positioned accordingly, the two holes closer together in the bottom. I did have one area where when inserting the Cam lock, it destroyed the board a little, but I was able to recover. Its also important to ensure the arrow on the Cam lock is pointed correctly to ensure its open to receive Cam bolt. This comes in handy when especially adding E. If arrows are in open position, the Cam bolts will slip in the Cam locks like butter. Once assembled, it appears to be a pretty sturdy piece of furniture.