I have a lot of grandchildren and decided to purchase two of these triple bunk beds. I think these bunk beds more than meet my needs. The bunk bed is quite sturdy. It isnt difficult to assemble, but it is tedious with a hundred or so screws to fasten. The beds come with required screws and 6mm allen/hex key. I used and recommend using an electric drill/driver to greatly speed up the assembly process. I used a 5/32 inch hex bit, which worked fine. The instructions are typical made/in/china instructions and take some effort to interpret. There are two types of corner posttwo of each type. If you look at them closely, you could conclude that there should be four unique corner post variants. That said, four variants are not required to assemble the bed. The post can be oriented 180 degrees off during the initial assembly. Despite efforts to get it right the first time, on both of my two beds I had to correct a post. You cannot complete the final assembly if the posts are not correctly oriented. Some aspect of the assembly will be much easier with a helper. A minor complaint is the safety labels that stuck on the frame are difficult to remove. They have lawyer/driven statements to not remove the labels, but why would anyone want visible large ugly white labels on the black frame. The mattresses were separately purchased from .
Sturdy bunk bed
I have a lot of grandchildren and decided to purchase two of these triple bunk beds. I think these bunk beds more than meet my needs. The bunk bed is quite sturdy. It isnt difficult to assemble, but it is tedious with a hundred or so screws to fasten. The beds come with required screws and 6mm allen/hex key. I used and recommend using an electric drill/driver to greatly speed up the assembly process. I used a 5/32 inch hex bit, which worked fine. The instructions are typical made/in/china instructions and take some effort to interpret. There are two types of corner posttwo of each type. If you look at them closely, you could conclude that there should be four unique corner post variants. That said, four variants are not required to assemble the bed. The post can be oriented 180 degrees off during the initial assembly. Despite efforts to get it right the first time, on both of my two beds I had to correct a post. You cannot complete the final assembly if the posts are not correctly oriented. Some aspect of the assembly will be much easier with a helper. A minor complaint is the safety labels that stuck on the frame are difficult to remove. They have lawyer/driven statements to not remove the labels, but why would anyone want visible large ugly white labels on the black frame. The mattresses were separately purchased from .