Needs more attention to details but it is beautiful
First off let me preface this, I have put together hundreds of prefab furniture pieces over the years. Im a bit fanatical how things should fit (as an Auto Tech I am just built this way, lol) My first impressions unboxing this thing was the packaging was done nice enough to keep pieces from becoming damaged during transit. And oh yeah, its heavy about 100lbs which is ok cause good furniture should be heavy. Everything came out of the box looking good. Next sort through the assembly hardware. Hmmm, wooden dowels and glue.not a deal killer but my first clue that I may not be happy. Assorted screws, camlocks (look cheap but we will see )etc all labeled nicely and all accounted for. Start assembling, ok the directions are clear no problems heremoving on.
Half of the way thru Im heavy into the cam lock part of the assembly and this is where Im not happy. I quickly realize my first instinct about the quality of the camlocks is true. 3 issues prop up, 1st the camlocks dont have the usual positive engagement feel most others have. Meaning you cant feel the lock engage and stop. These feel as if you never now when the lock has finally come to its fitting position. 2nd I start to find when the holes were bored for the cam locks the factory never cleaned them out properly. So now i start to clear the holes with a screw driver first hoping this changes the camlock engagement. Sadly it doesnt cause I find problem 3 which is holes not bored deep enough nor are the attaching pins on the adjacent boards set to the correct depth. End result is you must stop short tightening the cam locks or you just cracked the boards. And yes I cracked the face board at the very top. A small bulls eye appeared as I heard the sound of wood splitting. Because of the color and texture and location I realize this imperfection will probably never go noticed. Im pissed but Im not stopping at this point. What was I going to do? Box it up and sent it back. Kinda get the feeling the manufactures already consider this scenario.
So my final impressions where that I felt like this was some rookies first attempt at designing a piece of prefab furniture. If so they get a C minus for the build aspect and hardware assembly aspect. I have put together similar pieces with 2/3 less hardware and a whole lot less assembly time than this piece (@ 3hrs for this piece) . On the flip side of the assembly and why I ended with 3 stars was after its put together this thing is very pretty, its sturdy and well its almost unique in its appearance.
Needs more attention to details but it is beautiful
First off let me preface this, I have put together hundreds of prefab furniture pieces over the years. Im a bit fanatical how things should fit (as an Auto Tech I am just built this way, lol) My first impressions unboxing this thing was the packaging was done nice enough to keep pieces from becoming damaged during transit. And oh yeah, its heavy about 100lbs which is ok cause good furniture should be heavy. Everything came out of the box looking good. Next sort through the assembly hardware. Hmmm, wooden dowels and glue.not a deal killer but my first clue that I may not be happy. Assorted screws, camlocks (look cheap but we will see )etc all labeled nicely and all accounted for. Start assembling, ok the directions are clear no problems heremoving on. Half of the way thru Im heavy into the cam lock part of the assembly and this is where Im not happy. I quickly realize my first instinct about the quality of the camlocks is true. 3 issues prop up, 1st the camlocks dont have the usual positive engagement feel most others have. Meaning you cant feel the lock engage and stop. These feel as if you never now when the lock has finally come to its fitting position. 2nd I start to find when the holes were bored for the cam locks the factory never cleaned them out properly. So now i start to clear the holes with a screw driver first hoping this changes the camlock engagement. Sadly it doesnt cause I find problem 3 which is holes not bored deep enough nor are the attaching pins on the adjacent boards set to the correct depth. End result is you must stop short tightening the cam locks or you just cracked the boards. And yes I cracked the face board at the very top. A small bulls eye appeared as I heard the sound of wood splitting. Because of the color and texture and location I realize this imperfection will probably never go noticed. Im pissed but Im not stopping at this point. What was I going to do? Box it up and sent it back. Kinda get the feeling the manufactures already consider this scenario. So my final impressions where that I felt like this was some rookies first attempt at designing a piece of prefab furniture. If so they get a C minus for the build aspect and hardware assembly aspect. I have put together similar pieces with 2/3 less hardware and a whole lot less assembly time than this piece (@ 3hrs for this piece) . On the flip side of the assembly and why I ended with 3 stars was after its put together this thing is very pretty, its sturdy and well its almost unique in its appearance.